Canon 3410 - Manual (Page 23)

22
- When the paper is loaded in portrait orientation: < >
• When you change the orientation of the loaded custom size paper frequently, it is
convenient if you set <
> to < >. When <
> is set to < >, you do not need to change the setting for <
> each time you change the paper orientation. However, if
you specify < >, make sure that the size of the loaded paper matches the paper
size specified in the printer driver before printing. If they do not match, the printer may
stop printing, displaying the message <
>, or a paper jam may
occur. Be sure to check if the paper size specified in the printer driver matches the size of
the paper loaded in the paper cassette before using the printer. However, if <
>
is set to < >, the printer prints without checking the paper size even when the paper
size specified in the printer driver and the size of the paper loaded in the paper cassette
do not match.
• When custom size paper is printed from LIPS LX Printer Driver, you can load the paper
either in portrait or landscape orientation. However, when you are printing custom size
paper of its long edges 215.9 mm or less with <
> set to <
>, load the paper in landscape orientation. When you are not printing from LIPS LX
Printer Driver, load the paper in portrait orientation.
NOTE
Load custom size paper in Cassette 2 (Only when the optional paper feeder is installed)
in the same manner as you load custom size paper in Cassette 1.
1
Pull out the paper cassette.
CAUTION
Be sure to take the paper cassette out of the printer before loading paper.
If paper is loaded while the paper cassette is partially pulled out, the paper
cassette may drop or the printer may become damaged resulting in
personal injury.
Cassette 1 Cassette 2