Christie Digital Systems ROADIE S12 - Manual (Page 2)

Copyright 2003 Christie Digital Systems, Inc.. All rights reserved. All brand names and product names are trademarks,
registered trademarks or tradenames of their respective holders. Canadian manufacturing facility is ISO 9001 certified.
Due to constant research,
specifications are subject to
change without notice
.
July 03-NA
Brightness
•
12000 ANSI lumens at 1.9 kW
operation (typical)
• Over 90% brightness uniformity across
the screen
Contrast Ratio
•
Greater than 250:1 ANSI, greater than
400:1 full field
Resolution/Digital Processing
•
3-chip 1.1" DMD™‚ (Digital
Micromirror Device) system
• True SXGA 1280 x 1024 chip resolution
• 13-bit user selectable gamma table
• More than 1 billion displayable colors
Dynamic Scaling
•
Resizing capabilities to scale down
from 1600 x 1200 and up from
640 x 480 to SXGA resolution
• Independent horizontal and vertical
size adjustment for graphics and
video inputs
Horizontal Frequency Range
•
15 to 120 kHz
Vertical Frequency Range
•
24 to 120 Hz
Field Interchangeable Optional Lenses
•
Fixed short throw lens XGA 0.8:1
becomes 0.64:1 for SXGA
• Short zoom XGA lens: 1.5 2.5: 1
becomes 1.2-2:1
• Zoom XGA lens 2.5-4:1 becomes
2-3.2:1
• Zoom XGA lens 4-7:1 becomes
3.2-5.6:1
• Screen size 1.5m - 12.2m (5ft - 40ft)
diagonal
Power Lens Mount
•
Fully-motorized (with manual override)
lens focus, zoom, horizontal and
vertical offset
• Unique ILS™ (Intelligent Lens System) –
Lens position (zoom, focus, horizontal
and vertical offset) is automatically
recalled during channel switching
• Lens mount tilt adjustment
• Built-in light shutter
Inputs
•
Built-in RGB/YUV/YPbPr inputs
allowing separate H and V syncs,
composite sync and sync-on-green/
luma (5 BNC connectors)
• Multi-standard Video Decoder Module
(NTSC 3.58, NTSC 4.43, PAL, PAL 60,
PAL M, PAL N, SECAM) with one
composite video input (BNC and RCA
connectors) and one S-video input (two
BNC and 4-pin mini-DIN connectors)
• Slot for an optional input module
• Full compatibility with third-party
switchers
HDTV/DTV Compatibility
•
Full HDTV/DTV compatibility on
analogue RGB/YPbPr inputs
• Accepts 480i, 480p, 576i, 576p, 720p,
1035i, and 1080i formats at all
applicable frame/field rates
• Accepts 1080p at 24, 25 and 30 Hz
frame rates
• Optional HDTV Serial Digital Input
Module
Various Keypads
•
Standard hand-held IR backlit
remote keypad, front and rear
infrared sensors
• Built-in backlit keypad
• Optional RS422 two-way remote
controller with LCD display using
6-pin XLR connector with range of
600ft (183m)
• Optional wired backlit remote keypad
with 3-pin XLR connector
Control/Networking
•
Third party control system and
switcher compatibility
• Dual RS232 ports for computer
control, with loop-through for
connection of multiple projectors
• Dual RS422 ports for connection of
optional LCD two-way controllers and
loop-through to multiple projectors up
to 600ft (183m)
Diagnostics
•
Built-in LCD diagnostic display indicates
operational status and error messages
• Power and Status LED
• Full diagnostics through RS232 9-pin
D connector
Graphical User Interface
•
Auto set-up feature
• “Direct Access” intuitive user interface
for complete projector control in
5 world languages
• On-screen user movable menus to fit
different image aspect ratios
(4:3, 5:4, 16:9, etc.)
• On-screen help menus
• 100 channel memories
• Auto power feature
Lamp Specification/Color
Temperature
•
1900W SHB Xenon illumination system
• Constant color temperature over
the lamp life
• Color temperature adjustment range:
32000K to 93000K
• User replaceable lamp within
5 minutes
• Typical lifetime: 1000 hours
Variable Lamp Power Supply
•
User adjustable lamp power, levels
as low as 1000W
Power Requirements
•
Line voltage 220V AC to 240 VAC
+/- 10% @ 50/60 Hz
• Power consumption: 2800 W
maximum
• Thermal dissipation: 9500 BTU/hr
Size and Weight
•
225 lbs (102kg)
• 29" W x 54" L x 16" H
• 73.6cm W x 137.16cm L x 40.64cm H
Standard Accessories
•
IR remote keypad with batteries
• User manual with warranty card
Optional Accessories
•
Serial Digital Input (SMPTE 259M/CCIR
601) with loop-through feature
• Digital HDTV Input module (with loop-
through feature) compatible with
all known HDTV formats
• PanelLink™ Input module
• Compatible with all Marquee
Input modules
• RS422 two-way remote LCD controller
• Replacement lamp module
• Remote infrared sensor
• Service manual
• Librarian communication software
• Transit case
Regulatory Approvals
•
CSA, UL and European safety
approvals
• North American and European
EMI/EMC approvals
Warranty
•
Two years parts and labor
• Accessories: 90 days
Roadie S12
•
Specifications
• 100% digital solution from
source to screen. • Suite of custom accessories including
custom short throw, fixed and zoom
lenses, stacker kit, remote LCD controller. • Dynamic scaling - horizontal
and vertical adjustment for
video and data.
F E AT U R E S
WWW.CHRISTIEDIGITAL.COM
Corporate Offices
USA
10550 Camden Drive
Cypress, CA 90630
PH: 714-236-8610
FX: 714-503-3385
Toll free: (800) 407-7727 (NA only)
[email protected]
CANADA
809 Wellington Street North
Kitchener, Ontario N2G 4Y7
PH: 519-744-8005
FX: 519-749-3136
Toll free: (800) 265-2171 (NA only)
[email protected]
Branch Offices
UNITED KINGDOM
PH: +44 118 977 8000
FX: +44 118 977 8100
[email protected]
SINGAPORE
PH: +65 6877-8737
FX: +65 6877-8747
[email protected]
FRANCE
PH: +33 (0) 1 47 48 28 07
FX: +33 (0) 1 47 48 26 06
Mobile: +33 (0) 6 76 47 43 62
[email protected]
GERMANY
PH: +49 2161 664540
FX: +49 2161 664546
[email protected]
CHINA
PH: +86 21 6278 7708
FX: +86 21 6278 7707
[email protected]
MIL5810