Cuisinart Smart Stick Power Trio High Torque Hand Blender CSB-80 - Manual (Page 11)

11
OPERATION
BLENDINg
The specially designed blade is for mixing and puréeing all kinds of
foods, including salad dressings, powdered drink products, soups and
sauces and blended drinks like milkshakes or smoothies.
This blade mixes and stirs while adding only a minimum of air to your
mixture. A gentle up-and-down motion is all you need to make the
most flavorful, full-bodied recipes. Be careful never to remove the
blending shaft from the liquid while in operation, for it will splatter.
Tilt the pan or bowl away from you if needed to ensure the protective
blade guard on the blending shaft is fully submerged.
1. Put blending shaft into mixture to be blended.
2. Press and hold the Power button. The hand blender will continue
to run as long as the button is pressed in. To turn hand blender
off, release the Power button and the motor will stop.
3. Do not press the button for longer than 60 seconds at a time.
4. Unplug immediately after use.
CAUTION: DO NOT PUT FINgERS NEAR BLADE.
TO DISLODgE FOOD, UNPLUg HAND BLENDER
FROM THE OUTLET FIRST.
PULSINg
To pulse, press and release Power button.
FOOD PROCESSINg
CHOPPINg FOOD
1. Place the work bowl firmly on a flat, sturdy surface like a
countertop.
2. Put food in the work bowl. Be sure the food is cut into small
pieces (½ to 1 inch), and the bowl is not overloaded.
3. Put the food processor cover on top of the work bowl. Be sure
the cover is properly seated.
4. Press and hold the Power button.
Note: Due to the powerful motor provided with this unit,
Cuisinart recommends using one hand to support the
work bowl during operation.
5. When you have finished processing the food, stop the machine
by taking your finger off the Power button.
6. WHEN THE BLADE STOPS MOVINg , unplug the unit.
7. Remove the motor body with the cover from the work bowl.
8. Carefully remove the chopping blade, holding it by the gripping
ridges on the plastic sheath. NEVER TOUCH THE BLADE
ITSELF .