Crimestopper Security Products CS-2008PC User Manual
Cs-2008pc securlinc, Advanced remote control alarm system, Installation & operating instructions
Advertising
Table of contents
Document Outline
- CS-2008PCSecurLinc™
- ADVANCED REMOTE CONTROL ALARM SYSTEM
- INSTALLATION & OPERATING INSTRUCTIONS
- SIREN: Mount the siren under the hood to an inner fender-well, wheel-well, or other body surface with the open end facing downward. Run the red siren wire through the firewall using a rubber grommet. Ground the black to the body metal near the siren or
- PIN 12: ORANGE WIRE: NEGATIVE ARMED OUTPUT – Sta
- PIN 14: GRAY WIRE: (-) AUX REMOTE OUTPUT #1 (Optional, Programmable)
- PIN 16: BLUE/WHITE WIRE: (-) PASSENGER DOOR UNLOCK OUTPUT (Optional, requires relay)
- PIN 17: BROWN/WHITE WIRE: (-) HORN HONK / CHIRP OUTPUT (Optional, may require a relay)
- PIN 18: BLACK/YELLOW WIRE: (-) AUX REMOTE OUTPUT #3 (Optional, Programmable)
- PIN 20: BLACK/WHITE WIRE: DOME LIGHT ILLUMINATION OUTPUT 10A On-Board Relay (+ or -)
- PIN 21: WHITE WIRE: FLASHING PARKING LIGHT OUTPUT 10A On-Board Relay (+ or -)
- Negative Trigger (-):
- Positive Trigger (+):
- 2 VEHICLE CONTROL
- PROGRAMMABLE OPTIONS:
- 4. IGNITION-LOCK / CUSTOM OVERRIDE
- 5. IGNITION-UNLOCKING
- 6. DOUBLE UNLOCK PULSE
- 7.DOOR LOCK PULSE TIME
- TO RESTORE ALL PROGRAMMABLE OPTIONS TO DEFAULT VALUES (*):
- Button 1: Arm / Lock
- Button 1: Arm / Lock (Car 2)