CyberData 3CX User Manual
Page 10
Server Setup Guide
930272B
CyberData Corporation
10
13. After clicking on Save, a reboot timer countdown will begin.
Figure 4-8. Intercom Reboot Timer
14. After the Intercom reboots, the green Status LED on the Intercom will blink at one second
intervals to indicate normal operation.
Note
If Yes is selected for Speaker Beep After Initialization on the Intercom Setup page, you
will hear a tone after the initialization sequence is complete.
15. To test the Intercom, complete the following steps:
•
Pick up any phone that is configured to the 3CX system and call the Intercom’s extension
number.
•
When a connection is established (as indicated by a beep), speak into the phone and verify
that you can hear your voice through the Intercom.
•
Hang up the phone and press the Call Button on the Intercom.
•
When the phone rings, pick up the phone. Speak into the phone and verify that you can
hear your voice through the Intercom.
This step completes the procedure.
Rebooting, please wait... 00:04