Nc monitor, 3 camera panel – Corega CG-WLNCM4G User Manual
Page 52
50
NC Monitor
4.5.3 Camera Panel
TRIGGER OUT:
The function is not available for CG-WLNCM4G.
SNAPSHOT:
Click to capture a still image using the selected camera
and save the file in the computer. (To set the recording file path,
please go to “Setting” --> “Recording Configuration” --> “Recording File
Path”)
RECORD:
Click to start recording a video clip using the selected
camera. Click again to stop recording and save the file in the
computer. (To set the recording file path, please go to “Setting” -->
“Recording Configuration” --> “Recording File Path”)
TALK:
Click to allow the person at the camera’s location to hear
sounds and voices from your location. (You need to connect an
external speaker to the camera when using this function, as the
camera has no built-in speaker. Only one user is allowed to use this
function at a time). Please note that this button is only available for
cameras supporting 2-way audio (such as CG-WLNCM4G), and only
one user is allowed to use this function at a time.
LISTEN:
Click to receive sounds and voices from each camera’s
location.