Columbian Ultima 8920 - Manual (Page 2)

8520, 8620, 8720, 8920 Contour Ultima Rev: 11.06
INSE-85-20 2-3
Adjustments to the Ultima should not be made while in use.
Adjusting Back Angle:
Locate the adjustment lever bar on the Chair’s back, under the cover (you do not need to remove the cover to
operate the lever), and simply grip the lever and seat frame back and squeeze together. Then, with a lifting
motion, adjust the back angle up or down.
Adjusting Calf Support Angle:
Locate the adjustment lever bar on the Chair’s calf support, under the cover (you do not need to remove the
cover to operate the lever), and simply grip the lever and seat frame back and squeeze together. Then, with a
lifting motion, adjust the back angle up or down.
Adjusting Legs:
Locate the adjustment lever bar on each leg where it crosses the non-slip pads. By gripping the lever and pads,
squeeze together and with a lifting motion, adjust the angle up or down.
Warning: The legs should never be
used in the most upright position.
ADJUSTING ANY HIGHER THAN MAXIMUM LEG HEIGHT ADJUSTMENT
WILL CAUSE THE CHAIR TO BECOME UNSTABLE WHILE IN USE
Max. leg height position -90° position, do not use