Cricket Communications A100 - Manual (Page 28)

• LOOKUP <NAME> : Use the
Lookup command to retrieve and
display information for any name
stored in your Phonebook Entry
list.
• CHECK <ITEM> : The Check
command lets you check status
information for your phone. You
can say “Check“ or “Check Status“
to see and hear all status
information.
• Press the Left Soft Key Tutorial.
Voice Commands menu
information appears. To return to
the previous page, press the Left
Soft Key
Skip.
• Press the Right Soft Key Settings.
(Confirmation, Adaptation, Audio
Modes, About)
V.Cmd settings
1. Press the OK Key
Menu > Voice
Service > V.Cmd settings.
• Confirmation : You can control when
the system asks you to confirm a
name or number. You can adapt
the system to your voice for optimal
recognition
accuracy. During
adaptation, the system will prompt
you to speak a series of short phrases.
If you need to erase adaptation
data and set the system back to the
factory default, select Reset Voice.
• Adaptation : You can adapt the
system to your voice for optimal
recognition
accuracy. During
adaptation, the system will prompt
you to speak a series of short phrases.
If you need to erase adaptation
data and set the system back to the
factory default, select Reset Voice.
• Audio Modes : You can control the
level of audio guidance provided
by the system. In prompt mode (the
default), the system prompts for
required information. In readout
mode, the system prompts for
required information and reads out
the con
tents of the screen. In expert
mode, audio guidance is provided
by beeps only.
• About : It’s shown a Vsuite
information.
28
Voice service