Canon 650D - Manual (Page 308)

Using Eye-Fi Cards
308
5
Check the [Access point SSID:].
Check that an access point is
displayed for [Access point SSID:].
You can also check the Eye-Fi card’s
MAC address and firmware version.
Press the <M> button three times
to exit the menu.
6
Take the picture.
X The picture is transferred and the
<H> icon switches from gray (not
connected) to one of the icons below.
For transferred images, O is
displayed in the shooting information
display (p.266).
H (Gray) Not connected : No connection with access point.
H (Blinking) Connecting : Connection with access point.
H (Displayed) Connected : Connection to access point established.
H (  ) Transferring : Image transfer to access point in progress.
Transmission status icon
COP
Y