Clarion Sattelite Radio - Manual (Page 14)

Vehicle Installation Guide 12
If necessary, move the antenna to different
positions until the signal comes loud and clear.
6. Mark this position with masking tape or use
some other method that won’t scratch the body
work.
Route the cable
1. Plan the routing of the antenna cable to the
Plug and Play receiver antenna input.
Avoid any obstructions that could crimp, kink or
twist the cable. Use protective grommets
wherever you encounter rough openings.
2. At the lowest point of the rear window, route the
cable into the trunk, taking advantage of
existing cable conduits.
3. Snake the cable around the passenger
compartment to the back of the SIRIUS cradle.
In SUVs and minivans, route the cable into the
vehicle under the rubber molding of the hatch
door or tailgate, and then under the interior trim.
Avoid exposing the cable in the driver
or passenger areas where it could
become entangled in feet or other
objects.
4. Plug the antenna cable into the connector on
the side of the cradle.
5. Plug the cigarette lighter adapter into the
+12VDC power receptacle.
The power LED on the power button glows red.
You’re ready to enjoy SIRIUS programming.
Note
Sirius_Shuttle_Vehicle_Installation.book Page 12 Tuesday, February 1, 2005 5:54 PM