Casio EXILIM K1100PCM1DMX - Manual (Page 96)

96
Printing
DPOF settings are not cleared automatically after printing is complete.
The next DPOF print operation you execute will be performed using the last DPOF
settings you configured for the images. To clear DPOF settings, specify “00” for the
number of copies of all images.
Tell your print service about your DPOF settings!
If you take a memory card to a professional print service, be sure to tell them that it
includes DPOF settings for the images to be printed and the number of copies. If you
don’t, the print service may print all the images without regard to your DPOF settings,
or they may ignore your date stamp setting.
.
Date Stamping
You can use one of the following three methods to include the recording date in the
printout of an image.
Configuring
camera settings
Configure DPOF settings (page 95).
You can turn date stamping on and off each time you print.
You can configure settings so some images include the date
stamp and some don’t.
Configure the Camera’s Time Stamp setting (page 127).
• The camera’s Time Stamp setting imprints the date into a
snapshot when you shoot it, so the date is always included
when you print. It cannot be deleted.
• Do not turn on DPOF date stamping for an image that
includes a date stamped with the camera’s Time Stamp
function. Doing so can cause the two stamps to be
overprinted.
Configuring
computer
settings
You can stamp dates into images using the bundled Photo
Loader with HOT ALBUM (page 99) software (Windows only).
Professional
print service Request date stamping when ordering prints from a
professional print service.