Craftsman 316.7919 User Manual

Page 4

Advertising
background image

4

CRAFTSMAN FULL WARRANTY

If this Craftsman product fails due to a defect in material or workmanship within two years from the date of purchase, return it to any Sears
store, Parts & Repair Service Center, or other Craftsman outlet in the United States for free repair (or replacement if repair proves impossible).
This warranty applies for only 90 days from the purchase date if this product is ever used for commercial or rental purposes.
This warranty covers ONLY defects in material and workmanship. Sears will NOT pay for:
• Expendable items that can wear out from normal use within the warranty period, such as cutting line, filters or spark plugs.
• Repairs necessary because of accident or failure to operate or maintain the product according to all supplied instructions.
• Preventive maintenance, or repairs necessary due to improper fuel mixture, contaminated or stale fuel.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Sears, Roebuck and Co., Hoffman Estates, IL 60179

WARRANTY STATEMENT

KNOW YOUR UNIT

Cutting Shield

Fuel Cap

D-Handle

Hassle Free

®

Plus Cutting Head

Shaft Grip

Shaft Housing

Starter

Rope Grip

Throttle Control

Air Filter/

Muffler Cover

Spark Plug

Muffler

Convertible™

Coupler

On/Off Stop Control

APPLICATIONS
As a trimmer:

Cutting grass and light weeds.

Edging

Decorative trimming around trees, fences, etc.

Other optional accessories may be used with this unit.

Shoulder Strap

Loop

Primer Bulb

Line Cutting

Blade

ADJUSTING THE D-HANDLE
1.

Using a flathead or T-25 screwdriver,
loosen the 4 screws on the D-handle
enough to loosen it (Fig. 1).

2.

Rotate the D-Handle to the upright
position on the front side of the
shaft housing (Fig. 1).

3.

Hold the unit in the operating position
(Fig. 8). If necessary, reposition the D-
handle to the location that provides
the best grip.

4.

Tighten the 4 screws until the D-
handle is secure.

ASSEMBLY INSTRUCTIONS

INSTALLING THE TRIMMER ATTACHMENT
Prior to use, make sure trimmer attachment is installed correctly.
Please refer to Operating the Convertible™ Coupler System for
proper installation.
NOTE: Remove red cap or hanger from lower shaft housing prior to

assembling to Convertible™ coupler

Trimmer Attachment

Fig. 1

Advertising