Casio XJ-M255 - Manual (Page 38)

38
System Admin > Change Password
Remote on Specifies whether the projector can be turned on via wired LAN while the projector
is in standby (projector off with power being supplied).
Enable: Power on enabled.
Disable: Power on disabled (initial default).
Important!
Performing the procedure under “To initialize all System Admin page
settings” (page 36) causes the “Remote on” setting to change to “Disable”.
If you are controlling the projector via a wired LAN connection, be sure to
change the “Remote on” setting to “Enable” after you initialize System
Admin page settings. The “Remote on” setting can also be changed on the
projector using the setup menu. For full details, see “Wired LAN Settings
Main Menu (USB Port Models Only)” in the User’s Guide on the CD-ROM
that comes with the projector.
PJLink authentication Enables and disables PJLink connection authentication.
Enable: PJLink connection authentication enabled (initial default).
Disable: PJLink connection authentication disabled.
Show User Name Display Specifies whether the computer’s user name should appear on the projection
screen when projection starts from a computer connected to the projector via
wireless LAN.
Initial Default: On (User name displayed.)
Setting Name Description
New Password
Reinput password For input of the new password when logging in to the System Admin page.
Initial Default: admin
Setting Name Description