Scarlett SC-293 User Manual

Page 5

Advertising

www.scarlett-europe.com

SC-293

· Check the oven for any damage in transit:

Misaligned or bent door and sealing;
Housing and door window;
Inside

surfaces.

· If any damage occurs while using, switch off and unplug the oven and contact qualified service personnel.
· Place the microwave oven on a flat, stable surface, able to hold its weight with a food to be cooked in the oven.

· Do not place the oven where heat, moisture or high humidity are generated, or near flammable materials.
· Do not place anything on the oven. Do not block any openings on the appliance.

· For correct operation, the oven must have sufficient airflow. Allow 20 cm free space above the oven, 10 cm back and 5 cm from both sides.
MICROWAVE COOKING METHODS

· Arrange food carefully. Place thickest areas towards outside of dish.
· Watch cooking time. Cook for the shortest amount of time indicated and add more if needed. Food severely overcooked can smoke or ignite.
· Cover foods while cooking. Cover prevents spattering and helps to cook food evenly.

· Rearrange food such as meatballs halfway through cooking both from the top to the bottom and the center of the dish to the outside.
· Round/oval dishes rather than square/oblong ones are recommended, as food in corners tends to overcook.
OPERATION
· Plug oven to main.

· Place food into the oven and close the door.
· While any button is pressed, a beep sounds to acknowledge a setting.
COOKING INTERRUPTION
· This feature is useful for checking a food cooking degree.

· Cooking will be stopped while the door is opened. With the closed door treatment will continue.
MILTIFUNCTION KNOB

· Use to set current clock, time, and treatment mode.
· The oven light and cooling fan will come on while the timer is operating and

button is pressed.

· After a set time is over, display will show End , and beeps will sound every 3 minutes until the oven door will opened or any button will pressed.
· To interrupt operating press

button.

CURRENT TIME SETTING

· The LED display will flash «88:88» when plugged in power supply and after 3 seconds change to «-:-» flash, prompting you to set current clock.
· The oven clock is of 24h size.

· Press

button.

· Set current hours by turning the multifunction knob (clockwise to increase and vice versa).

· Press

button once more.

· Set current minutes by turning the multifunction knob.

· Press

button to confirm settings.

· Display will show entered time.
POWER LEWELS
· Guiding by a Table set a power level, pressing

button. With each subsequent button pressing display will show power level:

100 ž80 ž60 ž40 ž20 .

· Turning multifunction knob set treatment duration.
· Press

button.

AUTOMATIC COOKING

· Power level and treatment duration are pre-set for some food.
· Turn multifunctional knob to set suitable mode.
· Press

button.

LED

display

Indication

Auto

cooking

menu

Operation time, min:sec

Popcorn (85 g)

2:30

Popcorn (100 g)

2: 40

Pizza