Casio EX-Z500 - Manual (Page 158)

OTHER SETTINGS
158
1. Check to make sure there is no memory card
loaded in the camera.
• If there is a memory card loaded in the camera,
remove it (page 161).
2. Press [MENU].
3. Select the “Set Up” tab, select “Format”, and
then press [
̈].
4. Use [ ̆] and [̄] to select “Format”, and then
press [SET]. Entering the PLAY mode after
formatting built-in memory will cause the
message “There are no files.” to appear.
• To exit the format operation without formatting,
select “Cancel”.