Casio EX-Z300 - Manual (Page 19)

19
Quick Start Basics
4.
Continuing to keep the camera still, press the shutter button the rest of
the way down.
This records the snapshot.
IMPORTANT!
• While the “Anti Shake” setting is “D Auto” or “A Camera AS”, half pressing the
shutter will cause the camera to vibrate and emit an operation sound. This is
normal and does not indicate malfunction (page 68).
.
Using Quick Shutter
Fully pressing the shutting button without waiting for Auto Focus to operate will record
using Quick Shutter (page 71).
• With Quick Shutter, the camera focuses faster than normal Auto Focus, which
means you can capture quick moving action more easily. Note, however, that some
images may be out of focus when Quick Shutter is used.
• Whenever possible, take a little extra time to half-press the shutter button in order
to ensure proper focus.
.
If the image does not focus...
If the focus frame stays red and the back lamp is flashing green, it means that the
image is not in focus (because the subject is too close, etc.) Re-point the camera at
the subject and try to focus again.
.
If the subject is not in the center of the frame...
“Focus lock” (page 65) is the name of a technique you can use when you want to
shoot an image in which the subject to be focused on is not within the focus frame in
the center of the screen.
Full-press
Snap (Image is recorded.)
Shooting a Movie
Press [0] to start movie
recording. Press [0] again to
stop movie recording. See
page 47 for details.
[
0
]