Craftsman 50163 - Manual (Page 2)

WARRANTY
CRAFTSMAN PROFESSIONAL WARRANTY
If this Craftsman Professional product fails due to a defect in material or workmanship within
one year from the date of purchase, return it to any Sears store or other Craftsman Professional
outlet in the United States for free replacement.
This warranty gives you specific legal rights, and you may also have other rights which vary
from state to state.
Sears, Roebuck and Co., Hoffman Estates, IL 60179
SAVE THESE INSTRUCTIONS
For your safety, read, understand, and follow the information provided with and on this product.
• The owner and operator of this equipment shall have an understanding of this jack and safe
operating procedures before attempting to use. The owner and operator shall be aware
that use and repair of this device may require special skills and knowledge. Instructions
and safety information must be conveyed in operator’s native language before the jack
stands are used. If any doubt exists as to the safe and proper use of this device, remove
from service immediately.
• Inspect before each use. Do not use if broken, bent, cracked, or damaged parts (including
labels) are noted. Any jack stand that appears damaged in any way, operates abnormally
or is missing parts, shall be removed from service immediately.
• If the jack stand has been or suspected to have been subjected to a shock load (a load
dropped suddenly, unexpectedly upon it), immediately discontinue use until jack stand
has been checked by a Sears or other qualified service center. It is recommended that an
annual inspection be done by qualified personnel.
• Labels and Owner’s Manuals are available from Sears.
SPECIFICATIONS
Model Capacity Base Size Min. Height Max. Height
50163 4 Ton 8-3/4” x 7-1/2” 12” (305 mm) 17-5/16” (440 mm)
2
Fig. 1 Model 50163 Components
Saddle
Ratchet bar
Locking handle
Lock pin
Locking pawl
(stopper)
Base frame
Roll pin