Model ic612 – Channel Vision IC612 User Manual

Page 2

Advertising
background image

2

Features:
h

h

h

h

h

h

6.5” High performance in-ceiling loudspeaker
High power handling capacity
Recommended power: 20W to 160W (peak)
Gold speaker terminals
Proprietary pivoting “Pole Piece” technology with 1” voice
coil.
Polypropylene woofer with butyl rubber surround and an
18 ounce magnet
Small perforated designer grill

h

Channel Vision’s ARIA™

in-ceiling custom

installation speakers feature high power handling capability
providing true stereo quality sound and not simply
background music. The pivoting tweeters can be aimed to
any position to custom fit any room, making them perfect for
whole-house audio or home theater applications. High
quality materials ensure long life and great performance.
Gold speaker wire terminals not only provide better contact
surface but also offer less resistance to signal transfer for a
clearer sound.

IC612 6.5”

Mounting screws (4)

Model IC612

3

Installation:

O

OT

VER IGHTEN

h

h

h

h

h
h

Use the provided template to mark and cut a 7- ¾” hole in
drywall away from ceiling joists.

We recommend wiring with AWG 16 or larger, stranded
wire.

For proper phasing, both speakers must be wired alike.
Connect red wires to red terminals on the speakers and
to red or plus terminals on the amplifier.

Install IC612 in the hole. Tighten the mounting screws.
The mounting “dogs ears” will rotate outward and grip the
drywall.

the screws

Aim tweeter

To control the volume of the speaker locally, use an
impedance matching volume control, such as the
Channel Vision VC300.

D

N

O

T

. A battery

operated drill on a “low clutch” setting is recommended.

Specifications:

Frequency range:

Crossover:

Sensitivity:

Power Handling:

Drivers:

Magnet:

Impedance:

Finish:

Dimensions:

45Hz - 20kHz ± 6dB

12dB/octave (low pass)

12dB/octave (high pass)

90dB (1W/1m)

160 Watts peak

1- 1” Soft dome tweeter
1- 8” polypropylene woofer

18-ounce ferrite magnet

8 ohms

ABS plastic

9” OD. 4 height
(from surface of wall board)

hole size: 7-¾” diameter

Specifications subject to change without notice.

Advertising