CyberData VoIP Paging/Loudspeaker Amplifier - Manual (Page 13)

7. Record the User/login name and password from the following dialog because you will need it later to configure the
device.
4.2 Device Configuration
1. Open your browser and type the IP Address of the Paging Amplifier.
2. When prompted, use the following default Web Access username and password:
Web Access Username: admin
Web Access Password: admin
3. Click the SIP Setup button.
4. Enter the following information:
SIP Server: <IP Address of UC Server>
SIP User ID: <SIP User ID>
SIP Authenticate ID: <SIP User ID>
SIP Password: <Authenticate Password>
SIP Registration: Yes
5. Click Save Settings.
The figure below shows an example of how to complete the required fields.
11
Objectworld Communications Corp. • 308 Legget Drive • Ottawa, ON • Canada • K2K 1Y6 • T: 613‐599‐9698 • F: 613‐599‐7457 • www.objectworld.com