Location of parts – Crosley Radio CR-50TW User Manual

Page 2

Advertising
background image

POWER SOURCE

Connect the AC adapter between the unit and the power outlet.

UNPACKING THE TURNTABLE

1. Carefully remove unit from it's package and take it out of the plastic bag.

2. Open lid and remove black tie-wrap by untwisting and gently sliding out from

under tone arm.

3. Remove cardboard shipper.

4. Remove white protective needle cover by gently pulling towards front of unit.

TURNTABLE OPERATION

Press the unit on by switching the POWER (10) located on the front panel

to the ON position.

1. Press the PHONO (8) to set the PHONO mode.

2. Set the SPEED CONTROL SWITCH(5) to desire speed (33

1/3

,45 or 78 rpm).

Place the record on the turntable.

3. Adjust the Volume switch (10) set at the mid range.

4. Pull the TONE ARM (4) slightly to the right side until hear the “click” sound to

activate the turntable.

5. Move the tone arm by hand out over the record and slowly lower it. Re adjust

the VOLUME control (10) to the desire level.

6. At the end of the record, the tone arm will stop automatically by the center and

return to the armrest manually.

Accessory: ADAPTER FOR 45RPM

TO PLAY THE 45RPM RECORD, PLACE THE ADAPTER (3) ON THE SPINDLE(2).

RADIO OPERATION

1. Switch the unit ON by turning the POWER switch (10) to the ON position.

2. Place the VOLUME controls (10) in mid-range position.

3. Select the desired waveband by placing the BAND selector (8) in either the FM

or AM position.

4. Select the desired station on the DIAL DISPLAY by rotating the. TUNING KNOB

(9). If you are tuning in an FM station, turn the AM/FM/AFC BAND SWITCH to

the AFC position after you have tuned in the desired station, to lock it in.

5. Re-adjust the VOLUME controls (10) to suit your personal preference.

6. Switch the unit OFF by turning the POWER switch (10) to the OFF position.

LOCATION OF PARTS

1. TURNTABLE

2. SPINDLE

3. ADAPTER FOR 45 RPM RECORDS

4. TONE ARM

5. SPEED CONTROL SWITCH

6. SPEAKER

7. ARM REST

8. AM/FM/PHONO (FUNCTION SWITCH)

9. TUNING KNOB

10. ON-OFF SWITCH / VOLUME CONTROL

11. DIAL SCALE

12. ADAPTER JACK

13. AC ADAPTER

12

13

DC 12V

1

2

3

4

6

5

7

8

9

11

10

z

M

33

45

78

A

K

H

z1

60

0

14

00

120

0 1000 800 700

600

540

A

M

K

H

z

FM

M

H

10

8

10

71

06

104 1

02 100 98 96 94

92

90

88

FM

M

H

Z

AM/FM/PHONE

TUNING

VOLUME

ON

OFF

TROUBLE SHOOTING GUIDE

The unit is not functioning

* The AC power cord is not connected to a power outlet.

* The unit is not turned on : rotate the VOLUME knob from the OFF position

past the “click’’ to turn on the unit.

No radio

* The function switch is not in the correct position. Turn function switch insert

to RADIO.

* Adjust the VOLUME knob.

* Rotate the TUNING knob to find a radio station.

Needles are available for additional charges,
please call us at 1-800-926-7801 for assistance

www.crosleyradio.com

Advertising