Cambridge Audio Incognito SS10 - Manual (Page 4)

4 Incognito passive ceiling speakers
It is advisable to plan all aspects of installation in advance of work
beginning, preferably with the house/flat building schematics if available.
Great care should be taken to ensure that all building regulations are
followed. If in doubt consult an expert.
When placing the SS10 speakers, thought should be given to positions
which give the best desired sound coverage throughout a room, while
not interfering with existing or planned light fittings or joists. Also, locate
speakers taking into account location of furnishings for optimal stereo
reproduction.
Follow these steps to prepare the mounting location:
1. Remove the round cardboard pad from inside the supplied template
(see below).
PREPARING THE LOCATION
Use an L-shaped probe
to check available void
space before cutting
loudspeaker holes
110mm
3. Cut the mounting hole with a drywall or keyhole saw.
Be sure the mounting surface is between 10 and 30 mm thick, and
that there is at least 80mm of clearance behind the mounting
surface. Also, be sure no wall studs or other objects block the back
of the speaker.
2. Use the template to mark the position for the mounting hole at the
selected location.
Before cutting ceiling speaker holes, it is suggested that the area is
tested for clearance by making an L-shaped probe from strong wire
(see illustration below), drilling a small hole in the target area,
inserting the probe and slowly turning. Any obstructions will be
immediately obvious, and the target area can be moved to a more
suitable position.
SS10
207mm diameter
mounting hole