Installing directx 9– windows 2000 – Concord Camera 3040AF User Manual
Page 37
INSTALLING DIRECTX 9– WINDOWS 2000
Step 1
Make sure your camera is powered off and not connected to the computer.
Step 2
Make sure the computer is powered on and Windows 2000 is running.
Step 3
Close any other applications or software you may be running.
Step 4
Insert the CD-ROM included in your camera’s packaging into your computer’s CD-ROM Drive.
NOTE: If the installer does not start automatically within 30 seconds after the CD-ROM has
been inserted, click on "My Computer" either on the Desktop or in the Start Menu and locate
the CD-ROM Drive. Double click on the CD-ROM Drive icon for installation and proceed to
Step 5.
Step 5
Select the language. Click [OK].
Step 6
The installation screen will appear, click on Install
Microsoft DirectX 9.0.
Step 7
The next screen will begin the DirectX setup.
Click [Next >].
Step 8
Click [Next >].
Step 9
Click [Finish].
Your computer will automatically reboot.
36
SOFTWARE INSTALLATION GUIDE
En
3040 UG(513438-01).qxd 2003:11:15 10:31 AM Page 36