Concord Camera 3043 - Manual (Page 27)

26
SOFTWARE INSTALLATION (FOR WINDOWS USERS)
INSTALLING DIRECTX 9
Step 1 Make sure your camera is powered off and not connected to the computer.
Step 2 Make sure the computer is powered on and Windows 2000 is running.
Step 3 Close any other applications or software you may be running.
Step 4
Insert the supplied CD-ROM into your computer’s CD-ROM Drive.
NOTE: If the installer does not start automatically within 30 seconds after the CD-ROM
has been inserted, click on “My Computer” either on the Desktop or in the Start Menu
and locate the CD-ROM Drive. Double click on the CD-ROM Drive icon for installation
and proceed to Step 5.
Step 5
Select the language. Click [OK].
Step 6
The installation screen will appear, click on Install Microsoft DirectX 9.0.
Step 7
The next screen will begin the DirectX setup. Select “I accept the agreement “ then click
[Next >].