Casio EX-V8 - Manual (Page 202)

202
MANAGING YOUR FILES
■
Copying All Files in Built-in Memory to a
Memory Card
The following operation copies all files from built-in memory to a
memory card. You cannot copy files individually.
1. Load the memory card to which you want to
copy the files into the camera.
2. Turn on the camera, enter the PLAY mode and
then press [MENU].
3. On the “PLAY” tab, select “Copy” and then
press [
X].
4. Use [
S] and [T] to select “Built-in
Card”
and then press [SET].
This starts the copy operation. Wait until the “Busy... Please
wait...” message disappears from the monitor screen before
performing any operation on the camera.
• After the copy operation is complete, the last file copied
will be displayed on the monitor screen.
■
Copying a Single File from a Memory Card to
Built-in Memory
With this procedure, files must be copied one-by-one.
1. Load the memory card that contains the file
you want to copy into the camera.
2. Turn on the camera, enter the PLAY mode and
then press [MENU].
3. On the “PLAY” tab, select “Copy” and then
press [
X].
4. Use [ S] and [T] to select “Card Built-in”
and then press [SET].
5. Use [
W] and [X] to select the file you want to
copy.
6. Use [
S] and [T] to select “Copy” and then
press [SET].
This starts the copy operation. Wait until the “Busy... Please
wait...” message disappears from the monitor screen before
performing any operation on the camera.
• The copied image reappears on the monitor screen after
the copy operation is complete.