Caframo Petite Digital Stirrer BDC250 - Manual (Page 9)

9
Environmental Operating Conditions
The BDC250 stirrer must operate in the following conditions:
• Indoors
• Altitudes not exceeding 2000 meters
• Temperature from 5 to 40°C (41 to 104°F)
• Maximum relative humidity 80% for temperatures up to 31°C (87°F)
decreasing linearly to 50% relative humidity at 40°C (104°F)
• Pollution degree 2 in accordance with IEC 664 “Normally only non-
conductive pollution occurs. Occasionally, however, temporary conductivity
caused by condensation may be expected.”
General Operating Instructions
The stirrer must be securely mounted as specified in the installation instructions.
Ensure the mixing shaft and blade are securely attached. The stirrer is now ready
for use to mix liquids.
Button Operation Functions:
Power Button - Turns the stirrer motor on and off. When
initially turned on, stirrer will spin at 50 rpm.
Increase Button - Increases the speed.
Decrease Button - Decreases the speed.
OL Indicates an overload condition. The load is too great for the
stirrer and must be reduced. To reset stirrer turn power off
and back on.
Cleaning And Service
Cleaning
Using a mild soap and water solution, wipe the housing and control panel of the
stirrer with a damp cloth. Do not use chlorine bleach, chlorine-based cleanser,
abrasives, ammonia, steel wool, or scouring pads with metal content or similar
harsh solvents or abrasives. These may damage the surface of the stirrer.
Service
Do not attempt to service or repair a Caframo stirrer. If the stirrer housing is
opened, the warranty becomes void. Contact Caframo for return authorization
and return instructions.