Crane EE-5063 - Manual (Page 6)

5
TECHNICAL SPECIFICATIONS:
Rating Voltage 120V
Frequency 60Hz
Power 45W
Water Tank Capacity
Approx. 1.0 Gallon / 3.78
Liter
Output Per 24 Hours Approx. 2.1 Gallon / 8
Liter
Run Time Per Tank Min. 11 Hours
Humidifying Capacity Up to 500 sq.ft. / 46 m2
Noise < 36.5 (dB) A
CONTENTS OF PACKAGING
a. Instruction Manual
b. Central Humidifier Body
c. Water Tank
d. Water Tank Lid with Vapor Output Slots
If any of the above items are missing, please contact our service department at 1-888-
599-0992 (http://www.crane-usa.com) for replacement. Business hours Mon-Fri 9:00am
- 4:00pm CT
OPERATION AND USE
BEFORE EACH USE
CHECK HUMIDIFIER PLACEMENT - Place the Humidifier on an elevated non-metallic
waterproof surface for best performance. This is to help disperse the mist in the air,
and prevent it from being knocked or tipped over.
CHECK WATER LEVEL SENSOR - Make sure that the water level sensor is secured
properly. Refer to “cleaning and maintaining water level sensor” on page 9 for
instructions on how to assemble water level sensor.
CHECK FAN VENT - This fan vent is located on the bottom of the humidifier. The
purpose of the Fan Vent is to blow the cool mist through the vapor outlet slots. It is
important that this part is kept clean and free of obstructions. We recommend checking
the fan vent before using this item (i.e. lint, paper)
Do not place Humidifier on top of a towel, or a carpeted surface. The air vent on
the bottom may become blocked, and overheat the humidifier.
CAUTION:
DO NOT operate the humidifier without water in the water tank.
DO NOT plug in the cord with wet hands; electric shock could happen