Clarion DXZ655MP - Manual (Page 12)

14
DXZ655MP
280-8146-00
English
Basic Operations
Adjusting the bass
The bass gain, bass FREQ (center frequency)
and bass Q can be adjusted as follows.
1. Press the [A-M] button and select “ BASS
GAIN 0”.
2. Press the [ a , d ] lever upward or
downward and select from
“ BASS GAIN 0” ➜ “ BASS FREQ 50” ➜
“ BASS Q 1” ➜ “ BASS GAIN 0”…
3. Turn the [ROTARY] knob to adjust the gain,
the FREQ (center frequency) and the Q.
BASS GAIN : –6 to 8 (The factory default
setting is “0”)
BASS FREQ : 50Hz/80Hz/120Hz (The
factory default setting is “50”)
BASS Q : 1/1.25/1.5/2 (The factory
default setting is “1”)
4. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
Adjusting the treble
The treble gain and treble FREQ (center
frequency) can be adjusted as follows.
1. Press the [A-M] button and select “
TREBLE GAIN 0”.
2. Press the [ a , d ] lever upward or
downward and select from
“ TREBLE GAIN 0” ➜ “ TREBLE FREQ
12K” ➜ “ TREBLE GAIN 0”…
3. Turn the [ROTARY] knob to adjust the gain
and the FREQ (center frequency).
TREBLE GAIN : –6 to 6 (The factory default
setting is “0”)
TREBLE FREQ : 8KHz/12KHz (The factory
default setting is “12K”)
4. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
Adjusting the balance
1. Press the [A-M] button and select
“BALANCE 0”.
2. Turning the [ROTARY] knob clockwise
emphasizes the sound from the right
speaker; turning it counterclockwise
emphasizes the sound from the left speaker.
∗ The factory default setting is “0”. (Adjustment
range: L13 to R13)
3. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
Adjusting the fader
1. Press the [A-M] button and select “FADER 0”.
2. Turning the [ROTARY] knob clockwise
emphasizes the sound from the front
speakers; turning it counterclockwise
emphasizes the sound from the rear
speakers.
∗ The factory default setting is “0”. (Adjustment
range: F12 to R12)
3. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
Adjusting MAGNA BASS EXTEND
The MAGNA BASS EXTEND does not adjust
the low sound area like the normal sound
adjustment function, but emphasizes the deep
bass sound area to provide you with a dynamic
sound.
∗ The factory default setting is off.
1. Press and hold the [A-M] button for 1
second or longer to turn on the MAGNA
BASS EXTEND effect. “M-BASS EX ON”
lights in the display.
2. Press and hold the [A-M] button for 1 second
or longer to turn off the MAGNA BASS
EXTEND effect. “M-BASS EX OFF” lights in
the display.