Cobra Electronics MicroTalk - Manual (Page 5)

Operation
9
Operation
8
Se l e ct s u bchannel number by pushing and
re l e a s i n g
buttons.
When desired subchannel is displayed push and
release
button. If key stroke tone is on,
an audible tone will confirm your selection.
Select CTCSS
Subchannel
continued
4
5
Battery Low
When in normal use the icon may begin
flashing. This is a warning to you that your
batteries are getting low.
Replace alkaline batteries as soon as possible or
recharge NiMH battery pack.
Note
When battery capacity is at
the 1/4 level it is recom-
mended that you replace
alkaline batteries or
recharge your NiMH (Nickel
Metal Hydride) battery
pack.
Only the Cobra NiMH
battery (Part # FA-BP)
pack can be recharged.
Note
NiMH rechargeable battery
Pack (item #FA-BP) and 2
port desktop charger
(item #FA-CH) are not
included with this unit.
See Accessories section on
page 54.
Battery Low
Note
Push and hold the
buttons for fast channel
advance.
Push and release button. Small numbers
flash next to channel display on LCD.
3
310WX.MANUAL.qx copy 6/17/99 12:18 PM Page 8