Dell PowerVault NX3600 - Manual (Page 138)

system internal diagnostics run-client-connectivity-
diagnostic
Description
Run the client connectivity diagnostic for a CIFS or NFS client. In case of a client connectivity problem,
ask the client to try connecting once the diagnostic is run. The diagnostic files should be downloaded by
FTP from the following directory:
ftp://<FluidFS_administrator_user_name>@<client_VIP_or_name>:44421/diagnostic/archive/
ClientConnectivityDiagnostic/
NOTE: FTP is enabled by default on the FluidFS cluster. However, if FTP has been disabled, see
system internal security FTP configuration enable to re-enable FTP before using this command.
Format
system internal diagnostics run-client-connectivity-diagnostic <ClientIP>
<Protocol>
Arguments
Argument Description Format
<ClientIP> IP address of the client Existing client IP address in the
format: 'x.x.x.x'
<Protocol> Client protocol Possible values are CIFS, NDMP,
NFS, NFS4, Other
Example
Run the client connectivity diagnostic for a CIFS client with the IP address 172.22.69.18:
CLI> system internal diagnostics run-client-connectivity-diagnostic
172.22.69.18 CIFS
system internal diagnostics run-cifs-file-accessibility-
diagnostic
Description
Run the file accessibility diagnostic for a CIFS client. In case of a file accessibility problem, ask the client
to try accessing the file once the diagnostic is run. The diagnostic files should be downloaded by FTP
from the following directory:
ftp://<FluidFS_administrator_user_name>@<client_VIP_or_name>:44421/diagnostic/archive/
FileAccessibilityDiagnostic/
NOTE: FTP is enabled by default on the FluidFS cluster. However, if FTP has been disabled, see
system internal security FTP configuration enable to re-enable FTP before using this command.
138