Dell Inspiron 23 (5348, Early 2014) - Manual (Page 77)

Removing the Processor Heat-
Sink
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer . After working inside your
computer, follow the instructions in After Working Inside Your
Computer . For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Prerequisites
1 Remove the stand assembly .
2 Remove the back cover .
3 Remove the system-board shield .
4 Remove the VESA-mount bracket .
Procedure
1 Loosen the captive screws that secure the processor heat-sink to the
system board.
2 Remove the screw that secures the processor heat-sink to the display-
panel base.
3 Peel off the Mylar from the processor heat-sink and fan.
77