Dell PowerVault MD3660f - Manual (Page 13)

Figure 3. Array Manager Window
2. From the Array Manager window, click Add Array in the Commands section. To first create a separate folder to
contain the storage arrays you intend to add, click Add Folder).
NOTE: vSphere 5.1 supports a Discover Arrays option to performs automatic array discovery based on a range
of RAID controller module IP addresses that you provide. Either method of specifying arrays -Add Array or
Discover Arrays (if available) - can be used.
3. In the Add Storage Device window, enter the IP addresses for the RAID controllers module in the storage arrays
you want to add to VASA.
4. Enter the RAID controller module password, if required.
5. Repeat step 2 through 4 to add more storage arrays.
6. Close the Array Manager window.
To Register The VASA Provider In Your vSphere Client
1. Start the vSphere Client and connect to your vCenter Server.
13