Crestron electronic STX-1700CW - Manual (Page 35)

SMARTOUCH TM TOUCHPANELS
SmarTouch TM Touchpanel Accessories
www.crestron.com | 800.237.2041 | 201.767.3400
© 2007 Specifications subject to change without notice
smar
touch
TM
touchpanels
INTERFACE CABLES
187
ST-PK Programming Cable Kit
The ST-PK is a programming cable kit for SmarTouch TM
wireless touchpanels and most Isys ® touchpanels. It
is used only for loading touchpanel files, updating
firmware, and configuring the touchpanel prior to
operation. The ST-PK may also be used to update
firmware and adjust the digital audio signal processing
in Crestron’s 7.1 surround sound processors and
room solution boxes.
SPECIFICATIONS
Cables
3.5mm to RJ11 Cable Assembly (CNSP-585)
Provides connection between a SmarTouch wireless
touchpanel and the control processor via a RJ11 Cresnet
port; may require an additional CNRJ11 , ST-CNB, or
C2N-HBLOCK accessory.
RJ11-to-RJ11 Cable plus RJ11-to-DB9F
Adapter (STCP-502)
Provides connection between an Isys touchpanel, surround
processor, or room solution box RS-232 port and
PC COM port.