Crestron electronic STX-1700CW - Manual (Page 24)

SMARTOUCH TM TOUCHPANELS
SmarTouch TM Touchpanel Accessories
www.crestron.com | 800.237.2041 | 201.767.3400
© 2007 Specifications subject to change without notice
smar
touch
TM
touchpanels
WALL MOUNT DOCKING ASSEMBLY
176
DA-1700CW Wall Mount Docking Assembly
The DA-1700CW Docking Assembly is a wall mounted
microprocessor based battery charger designed
specifically for the STX-1700CW and STX-1700CXPW
wireless touchpanels. When docked in the
DA-1700CW, the touchpanel operates as a wired
touchpanel with a direct connection to the Cresnet
network. The docking assembly also provides
operating power to the touchpanel while
simultaneously charging the battery pack. A software-
controlled latch secures the touchpanel into the
docking assembly, and is released upon pressing
a button or entering a code on the touchpanel.
One DA-1700CW is included with the STX-1700CW or
STX-1700CXPW. Additional units may be installed to
provide multiple docking locations. Installation of each
DA-1700CW requires one BB-1700CW back box.
SPECIFICATIONS
Connectors
NET: (1) 4-pin 5mm detachable terminal block
Cresnet slave port, connects to Cresnet control network
Power Requirements
Cresnet Power Usage: 34 Watts
(1.42 Amps @ 24 Volts DC) including touchpanel
Environmental
Temperature: 50° to 113° F (10° to 45° C)
Humidity: 10% to 90% RH (non-condensing)
Enclosure
Black metal assembly with electrically operated
latching mechanism
Dimensions
Height: 6.51 in (16.54 cm)
Width: 5.57 in (14.14 cm)
Depth: 3.56 in (9.05 cm)
Weight
3.21 lbs (1.46 kg)