Dell KVM 2162DS User Manual
Page 23
Installation
xxx
|
xxx
23
NOTE: If you changed the default HTTP/HTTPS ports in the serial console
and are using an IPv4 address, use IP address format:
https://<ipaddress>:<port#>, where “port#” is the number you specified in the
serial console. If you are using an IPv6 address, use format: https://
[<ipaddress>]:<port#>, where “port#” is the number you specified in the serial
console. If you are using an IPv6 address, you must enclose the address in
square brackets.
2
The log in window opens. Type your username and password and click OK.
NOTE: The default username is Admin and the password has no entry.
3
The web interface opens and displays the Connections tab.
NOTE: To use the Web interface, Java Runtime Environment (JRE) version
1.6.0_11 or higher must be installed on your computer. The KVM Switch will
attempt to detect Java on your PC. If Java is not installed, download it from
http://www.java.com, then associate the JNLP file with Java WebStart.
NOTE: Once you have logged in to the web interface, you will not have to log
in again when launching new sessions unless you have logged out or your
session has exceed the inactivity timeout specified by the administrator.