Network connection setup, Network printer setup on a local network – Dell C1760NW Color Laser Printer User Manual

Page 56

Advertising
background image

54

Installing Printer Drivers on Computers Running Windows

®

8 To change the printer name, enter the printer name in the Printer name box, and then click Next.

Installation starts.

9 If you do not share your printer, select Do not share this printer. If you share your printer, select Share this printer

so that others on your network can find and use it. Click Next.

10 As the driver installation is completed, click Print a test page to print a test page. To use this printer as the default

printer, select the Set as the default printer check box.

11 Click Finish.

Network Connection Setup

Network Printer Setup on a Local Network

For installing host-based printer driver

1 Insert the

Software and Documentation

disc into your computer to start Dell Printer Setup.

2 Click Install Printer Driver and Software.
3 Select Network Installation, and then click Next.
4 Select Local Installation, and then click Next.
5 Select the printer you want to install from the printer list, and then click Next. If the target printer is not displayed

on the list, click Refresh to refresh the list or click Add Printer to add a printer to the list manually. You may specify

the IP address and port name at this point.
If you have installed this printer on the server computer, select

I am setting up this printer on a server check box.

NOTE:

When using AutoIP, 0.0.0.0 is displayed in the installer. Before you can continue, you must enter a valid IP address.

NOTE:

You can install the Web Services on Devices (WSD) printer, but the installation of using Windows Server 2008 is not

supported.

NOTE:

If you are running any of the following operating systems, a Windows Security Alert is displayed:

Windows Vista

Windows Vista 64-bit Edition

Windows 7

Windows 7 64-bit Edition

Windows 8

Windows 8 64-bit Edition

Windows Server 2008

Windows Server 2008 64-bit Edition

Windows Server 2008 R2 64-bit Edition

Windows Server 2012

To continue installing the host-based printer driver, click Unblock or Allow access (for Windows Server 2008 R2

and Windows 7).

6 Specify the printer settings, and then click Next.

a

Enter the printer name.

b

If you want other users on the network to access this printer, select Share this printer with other computers on

the network, and then enter a share name that users can identify.

c

If you want to set a printer as the default, select the Set this printer as default check box.

Advertising
This manual is related to the following products: