Dell 3100cn Color Laser Printer - Manual (Page 43)

Values:
Line Termination
Purpose:
To add the line termination commands.
Values:
Color Mode
Purpose:
To specify the color mode to Color or Black. This setting is used when the color printing mode setting is not specified for the print job that is sent to the printer.
Value:
PostScript
Use the PostScript menu to change printer settings that only affect jobs using the PostScript emulation printer language.
PS Error Report
Purpose:
To specify whether the printer outputs error contents for a PostScript error.
Values:
Off*
Does not print in the draft mode.
On
Prints in the draft mode.
Off*
The line termination command is not added.
CR=CR, LF=LF, FF=FF
Add-LF
The LF command is added.
CR=CR-LF, LF=LF, FF=FF
Add-CR
The CR command is added.
CR=CR, LF=CR-LF, FF=CR-FF
CR - XX
The CR and LF commands are added.
CR=CR-LF, LF=CR-LF, FF=CR-FF
Black*
Prints in the black and white mode.
Color
Prints in the color mode.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.