Deleting a disk pool – Dell POWERVAULT MD3600I User Manual
Page 104
Deleting A Disk Pool
Use the Delete option to delete a disk pool and all of the virtual disks in the disk pool. When a disk pool is deleted, the
physical disks that were associated with the disk pool change to the Unassigned state. This process creates more
unconfigured capacity in the storage array, which you can reconfigure to meet your storage needs.
CAUTION: Possible loss of data access – Deleting a disk pool causes loss of all data on the virtual disks in the disk
pool. Before performing this operation, back up the data on all of the virtual disks in the disk pool, stop all input/
output (I/O), and unmount any file systems on the virtual disk.
Keep these guidelines in mind before you delete a disk pool:
•
If you delete a disk pool that contains a snapshot repository virtual disk, you must delete the base virtual disk
before you delete the associated snapshot virtual disk.
•
The capacity from the physical disks that were previously associated with the deleted disk pool is added to
either of these nodes:
– An existing Unconfigured Capacity node.
– A new Unconfigured Capacity node if one did not exist previously.
•
You cannot delete a disk pool that has any of these conditions:
– The disk pool contains a repository virtual disk, such as a snapshot group repository virtual disk, a
replication repository virtual disk, or a Consistency Group member repository virtual disk. You must
delete the logical component that has the associated repository virtual disk in the disk pool before you
can delete the disk pool.
NOTE: You cannot delete a repository virtual disk if the base virtual disk is in a different disk pool
and you have not requested to delete that disk pool at the same time.
– The disk pool contains a base virtual disk or a target virtual disk participating in a virtual disk copy
operation with the status of In Progress.
To delete a disk pool:
1.
Select the Storage & Copy Services tab.
2.
Select one or more disk pools.
3.
From the menu bar, select Storage → Disk Pool → Delete.
The Confirm Delete Disk Pool dialog is displayed.
4.
Type yes to confirm, and click OK.
The Delete Disk Pool - Progress dialog is displayed while all of the virtual disks in the disk pool are being deleted.
Viewing Storage Array Logical Components And Associated
Physical Components
You can view the logical components (virtual disks , disk pools, and disk groups) in a storage array, and then view the
physical components (RAID controller modules, RAID enclosures, physical disks, and expansion enclosures) that are
associated with a specific logical component.
1.
To view the components, select the Storage & Copy Services tab.
The object tree is displayed on the left, and the Properties pane is displayed on the right. The object tree provides a
view of the components in the storage array in a tree structure. The components shown include the disk pools, the
disk groups, the virtual disks, the free capacity nodes, and any unconfigured capacity for the storage array. The
Properties pane displays detailed information about the component that is selected in the object tree.
2.
To view the physical components that are associated with a component, perform one of these actions:
104