Dell Dimension 4500S User Manual

Page 62

Advertising
background image

62

A d d i n g Pa r t s

www

.dell.com | support.dell.com

CAUTION:

Before you begin any of the procedures in this section,

follow the safety instructions on page 7.

CAUTION:

To guard against electrical shock, always unplug your

computer from the electrical outlet before opening the cover.

1

Shut down the computer (see page 22).

2

Turn off any attached devices and disconnect them from their
electrical outlets.

NOTICE:

To disconnect a network cable, first unplug the cable from your

computer and then unplug it from the network wall jack.

3

Disconnect the computer power cable from the wall outlet, and then
press the power button to ground the system board.

4

Remove the computer stand, if it is attached (see page 16).

NOTICE:

Ensure that there is sufficient space to support the open cover—at

least 30 cm (1 ft) of desk top space.

7

line-out connector

Use the green line-out connector (available on computers with integrated sound)
to attach headphones and most speakers with integrated amplifiers.

On computers with a sound card, the line-out connector is on the card.

8

microphone connector

Use the pink

microphone connector (available on computers with integrated

sound) to attach a personal computer microphone for voice or musical input into
a sound or telephony program.

On computers with a sound card, the microphone connector is on the card.

9

USB connectors

Connect USB devices such as a mouse, keyboard, printer, joystick, and computer
speakers into any of the USB connectors.

10 keyboard connector

If you have a standard keyboard, plug it into the purple keyboard connector. If you
have a USB keyboard, plug it into a USB connector.

11 diagnostic lights

Use the lights to help you troubleshoot a computer problem based on the
diagnostic code. For more information, see page 48.

12 video connector

Plug the cable from your monitor into the blue connector.

13 serial connector

Connect a serial device, such as a handheld device, to the serial port.

Advertising