Creating user accounts, Modifying user accounts – Dell PowerVault 160T LTO2 (Tape Library) User Manual
Page 49
Running Your Library: Dell PowerVault 160T Tape Library User's Guide
file:///C|/Users/greshma_dhanarajan/Desktop/ug/running.htm[5/16/2013 10:08:20 AM]
There are three user privilege levels: guest, user, and administrator. Guests see only the Library Management Console main
screen. Users are allowed to operate a partition, but cannot run diagnostic tools (which require access to the physical
library), and administrator users are allowed access to the entire physical library and all of its partitions. For a summary of
user privileges defined by physical library, partition, and command menu, refer to
Creating User Accounts
1. Log on as administrator.
2. If you are not already working from the physical library, select it from the View menu. Refer to
.
3. Select Setup—> Users.
The Users dialog box appears.
4. To create a user account, select Create. The User Account Type dialog box is displayed.
5. Enter the new user name and password.
6. Retype the password.
7. Select a privilege level.
The choices are Administrator or User.
For a list of commands available to the Administrator and those available to the User, refer to
If you select the User privilege level, the Assign Partitions dialog box appears. Proceed to
.
If you select the Administrator privilege level, proceed to
.
8. Select the library or libraries to which the user should have access, or select Select All to assign access to all listed
libraries.
NOTICE:
To maintain security, the administrator password should be changed during the first session
where the default admin/password account is used.
9. Select Finish to register library access decisions, or Cancel to exit without making changes.
Whenever the Back button is displayed, you may use it to go back and make changes to a previous entry.
Modifying User Accounts
1. Log on as Administrator.
2. If you are not already working from the physical library, select it from the View menu. Refer to
.
3. Select Setup—> Users.
The Users dialog box appears.
4. Select the name of the account you wish to modify.
5. Select Modify.
The User Account Type dialog box is displayed.
6. If you are changing the password, enter the new password into the Enter Password text box.
If you are not changing the password, leave the Enter Password text box blank.
NOTE:
Best practice is to change all account passwords periodically.
7. If you changed password, re-enter the new password into the Confirm Password text box.
If you are not changing the password, leave the Confirm Password text box blank.
If the privilege level is User, proceed to