Dell PowerVault MD3200i - Manual (Page 99)

Configuration: About Your Host 99
• Right-click the storage array or the Default Group, and select
Define Host Group from the pop-up menu.
4 Type the name of the new host group in Enter new host group name.
5 Select the appropriate hosts in the Select hosts to add area.
6 Click Add.
NOTE: To remove hosts, select the hosts in the Hosts in group area, and click
Remove.
7 Click OK.
The host group is added to the storage array.
Adding a Host to a Host Group
You can add a host to an existing host group or a new host group using the
Define Host Wizard. For more information, see "Defining a Host" on
page 96.
You can also move a host to a different host group. For more information, see
"Moving a Host to a Different Host Group" on page 99.
Removing a Host From a Host Group
You can remove a host from the Topology pane on the Mappings tab of the
Array Management Window. For more information, see "Removing a Host
Group" on page 100.
Moving a Host to a Different Host Group
To move a host to a different host group:
1 In the AMW, select the Mappings tab, select the host node in the
Topology pane.
2 Perform one of these actions:
• Select Mappings Move.
• Right-click the host node, and select
Move from the pop-up menu.
The Move Host dialog is displayed.
3 In the Select host group, select the host group to which you want to move
the host.
The
Move Host Confirmation dialog is displayed.
book.book Page 99 Tuesday, June 18, 2013 3:15 PM