Dell 1710/n Mono Laser Printer - Manual (Page 22)

22
Loading Paper
w
w
w
.d
el
l.
c
om
|
s
upp
ort
.del
l.
com
Loading the Manual Feeder
The manual feeder is located at the front of your printer and can only feed one sheet of print
media at a time. You can use the manual feeder to make quick runs of paper types or sizes that
are not currently loaded in the paper tray.
To load the manual feeder:
1 Place a sheet of the selected print media, print side facing up, at the center of the manual
feeder, but only to the point where its leading edge can contact the paper guides.
Otherwise, the printer will engage the print media too soon and skew the print job.
2 Adjust the paper guides to the print media’s width.
3 Hold both sides of the print media close to the manual feeder and push it into the printer
until it automatically engages.
There is a brief pause between the time the printer engages the print media and when it
feeds into the printer.