Connecting to an image output device – Casio XJ-A241/XJ-A246* User Manual
Page 11
Advertising
11
Connecting to an Image Output Device
Connect the projector’s COMPUTER terminal to the RGB terminal of a computer as shown in the
illustration below.
Important!
z Always turn off the projector and the computer before connecting them.
z Take care so the volume level of the computer is not set too high.
Connecting the Analog RGB Output of a Computer to
the Projector
Bundled mini D-Sub cable
Audio cable (commercially available)
AV terminal
To monitor terminal
(analog RGB output terminal)
COMPUTER terminal
To line output terminal
Projector
Computer
Advertising
This manual is related to the following products: