Dell 1125 Mono Laser MFP - Manual (Page 71)

Select a scan task and click Remove to delete the scan task from the preview area.
Scan/Preview Area
This area displays the item you are scanning or enables you to select the area to scan. Use the rectangle to select the area to scan. Drag the scan areas to
change the size of the scan area. Place the mouse cursor inside the rectangle to move the scan area.
Exit
Click Exit to close the dialog box.
Scan
Click Scan to scan the item that is loaded in the ADF or on the scanner glass.
Preview
Click Preview to display the item that is in loaded in the ADF or on the scanner glass.
Changing Default Settings
You can set up default scan settings instead of changing settings for each scan.
1. Press Scroll (<>) to select Scan and press Select (P).
2. Press Scroll (<>) to select Scan Default and press Select (P).
3. Press Scroll (<>) to select to P C and press Select (P).
4. Press Scroll (<>) to select the new destination default:
¡ Microsoft Paint
¡ Email
¡ My Documents
¡ PaperPort
¡ OCR
5. Press Select (P) to select the new destination default.
6. Press Scroll (<>) to select Scan Color and Select (P).