Canon SUPER G3 FAX L900 User Manual
Page 13
Advertising
12
VIII RE-SENDING
IF No.VII ABOVE IS NOT POSSIBLE, EACH DOCUMENT
RECEIVED IN THE MEMORY CAN BE RE-SENT
INDIVIDUALLY TO ANOTHER DESTINATION FOR
PRINTING
1.
Open panel cover
2. Press
MEMORY REFERENCE
3.
Press
∨∨∨∨
to display “4. RESEND DOCUMENT”
4. Press
SET
5.
Press
∨∨∨∨
if necessary to select a new “TX/RX No.”
(must be greater than 5000)
6. Press
SET to display “SELECT LOCATIONS”
7.
Dial the fax number
8. Press
SET twice
Machine will now start to send the document as specified.
Advertising
This manual is related to the following products: