Case Construction CX75SR - Manual (Page 12)

Standard equipment
• One-piece boom or double offset boom
• Steel tracks 450 mm
• High performance “ULTRA CLEAN” (1µ) filtration
system
• “Auxiliary” control valve section
• Dozer blade
• 2 travel speeds
• Load-holding valves (boom and dipper)
• Tier 2 engine (reduced smoke emissions and noise
level)
• Electric motor speed control
• Automatic engine speed return to idle
• RH, LH and rear rear-view mirror
(safety when swinging and
reversing)
Options
• Single-acting system (“hammer” type)*
• “Multipurpose” circuit (hammer or shears)*
• Double-acting circuit (shears, etc.)*
• 2nd auxiliary circuit (clamshell orientation type)*
• Backhoe-clamshell circuit*
• “MULTIFIT” Hydraulic quick coupler
• FOPS (roof) cab protection
• Self-regulating air conditioning
• Rubber tracks 450 mm
• Safety valves (boom - dipper)
* Note: availability of these circuits varies depending on
the type of boom and length of the dipper
Standard and optional equipment can vary from
country to country
www.casece.com
WORLDWIDE CASE CONSTRUCTION
EQUIPMENT CONTACT INFORMATION
EUROPE/AFRICA/MIDDLE EAST:
CENTRE D’AFFAIRES EGB
5, AVENUE GEORGES BATAILLE - BP 40401
60671 LE PLESSIS-BELLEVILLE - FRANCE
NORTH AMERICA/MEXICO:
700 STATE STREET
RACINE, WI 53404 U.S.A.
LATIN AMERICA:
AV. GENERAL DAVID SARNOFF 2237
32210 - 900 CONTAGEM - MG
BELO HORIZONTE BRAZIL
ASIA PACIFIC:
UNIT 1 - 1 FOUNDATION PLACE - PROSPECT
NEW SOUTH WALES - 2148 AUSTRALIA
CHINA:
No. 29, INDUSTRIAL PREMISES, No. 376.
DE BAO ROAD, WAIGAOQIAO FTZ, PUDONG,
SHANGHAI, 200131, P.R.C.
NOTE: Standard and optional fittings can vary
according to the demands and specific
regulations of each country. The illustrations
may include optional rather than standard
fittings - consult your Case dealer. Furthermore,
CNH reserves the right to modify machine
specifications without incurring any obligation
relating to such changes.
Conforms to directive 98/37/CE
CNH UK Ltd.
Armstrong House
The Finningley Estate
Hayfield Lane
Doncaster
DN9 3XA
Fax +44 (0)1302 802126
Form No. 26051038GB - Printed in Italy - LEADER Firenze - 03/06