Dell OptiPlex 755 - Manual (Page 12)

Set PKI DNS Suffix
When the Set PKI DNS Suffix option is selected under the Remote Configuration menu, you are prompted to enter the PKI DNS Suffix of the Provisioning
Server. The Key Value is maintained in EPS.
Un-provision
The Un-Provision option allows you to reset the Intel AMT configuration to factory defaults. There are three types of un-provision:
l Partial Un-provision – This option resets all of the Intel AMT settings to their default values but leaves the PID/PPS. The MEBx password remains
untouched.
l Full Un-provision – This option resets all of the Intel AMT settings to their default values. If a PID/PPS value is present, both values are lost. The MEBx
password remains untouched.
l CMOS clear – This un-provision option is not available in the MEBx. This option clears all values to their default values. If a PID/PPS is present, both
values are lost. The MEBx password resets to the default value (admin). To invoke this option, you need to clear the CMOS (i.e. system board jumper)
VLAN
This option enables or disables VLAN support for Intel AMT. If VLAN support is enabled, the VLAN Tag (1-4094) must be configured.