Figure 4-8 – Dell PowerVault MD3000 User Manual
Page 67
Advertising
Installing Enclosure Components
67
Figure 4-8.
Removing and Replacing the Controller/Power Supply Cage
5 Slide the controller/power supply cage out of the enclosure and place it aside.
6 Reaching into the enclosure chassis from the back, carefully disconnect the midplane from the control
panel and lift it out of the enclosure (see Figure 4-9).
7 To re-install the midplane, reverse the previous steps.
1
Phillips screws (4)
2
controller/power supply cage
2
1
Advertising