Dell 1130n Laser Mono Printer - Manual (Page 74)

1. Pressure lever
If you do not see the jammed paper, go to next step.
5. Pull the fuser cover levers down and remove the paper.
Return the fuser cover levers to their original position.
The fuser area is hot. Take care when removing paper from the machine.
6. Close the rear cover.
7. Open and close front cover, printing automatically resumes.
Solving other problems
The following chart lists some conditions that may occur and the recommended solutions. Follow the suggested
solutions until the problem is corrected. If the problem persists, call for service.
Power problems
Click this link to open an animation about power problems.
Condition Suggested solutions
The machine is not receiving power,
or the connection cable between the computer and the
machine is not connected properly. Plug in the power cord and press (power) on the
control panel.
Disconnect the machine cable and reconnect it.
For Local Printing