Dell Latitude C640 - Manual (Page 20)

1 M2 x 3-mm screws (2)
2 top cover
3 center control cover
4 M2.5 x 5-mm screws (5)
5 bottom case
6 display-feed flex cable
7 EMI shield bracket
8. Remove the two M2 x 3-mm screws that secure the display-feed flex cable to the system board.
NOTICE: When reconnecting the display-feed flex cable connector to the system board, push down on the top left and
right ends of the connector. Pressing on the center of the connector may damage resistors and compromise EMI
protection in the computer.