Dell PowerVault DR4100 - Manual (Page 114)

Error Code Message Information
PSU0033
Message The temperature for power supply < number > is outside of the
allowable range.
Details System performance may be degraded.
Action Check the system operating environment, including airflow and inlet
temperature. Check system logs for temperature and thermal
component failures.
PSU0034
Message An under voltage fault detected on power supply < number >.
Details This failure may be the result of an electrical issue with cables or
subsystem components in the system.
Action
1. Remove and reinstall the power supply.
2. Check cables and subsystem components in the system for
damage.
3. If the issue persists, see Getting Help .
PSU0035
Message An over voltage fault detected on power supply < number >.
Action Check input power or reinstall the power supply. If the issue persists,
see
Getting Help .
PSU0036
Message An over current fault detected on power supply < number >.
Details This failure may be the result of an electrical issue with cables or
subsystem components in the system.
Action
1. Remove and reinstall the power supply.
2. Check cables and subsystem components in the system for
damage.
3. If the issue persists, see Getting Help .
PSU0037
Message Fan failure detected on power supply < number >.
Action Check for fan blockage. If the problem persists, see Getting Help .
PSU0076
Message A power supply wattage mismatch is detected; power supply
<
number > is rated for < value > watts.
Details Power supplies should be of the same input type and power rating.
Action Install matched power supplies and review this manual for proper
configuration.
114